Can the SNK bearing seat be fitted with a tight sleeve?
SKF bearing seat can be installed with a tight set of bearings, SKF bearing seat has SNH, SNU, SNL and other models, here in the sincere heavy bearing seat on the SNL series bearing block to illustrate.The SNL bearing housings can be mixed in one case using two sizes. For example, SNL511-609 can hold 22211EKOr 22309CCK/W33 spherical roller bearings. The outer diameters of the two bearings are 100mm. Using different tightening sleeves, oil seals with different cross section heights and fixed rings with different widths, the two series of bearings can be accommodated in the same bearing seat.
I don't know the meaning of the question! What does it have to do with SKF?! If you want to install a tight set of bearings, it is recommended to use the SN type bearing seat!
For example: match 22211EKSNL, 22511/1-11/16, TG for bearings:HA 311 tight sleeveTSN 511G oil sealFRB9.5/100 fixation ringSNL, 22609/1-7/16, TGA for 2309CCK/W33 bearings:HA2309 tight linerTSN609GA oil sealFRB4/100 fixation ringTapered bore bearings are usually mounted on a smooth (flat) shaft with the aid of a tight sleeve or a backing sleeve, but can also be mounted on a stepped shaft, and the bearings are secured to the shoulder by a precisely machined spacer.The sleeve is mounted on the cylindrical shaft so that the economically inexpensive round (cold rolled) shaft (tolerance H9) can be used.
