Can the step motor be in parallel with two phases
Two windings in parallel can't be correct either. Because all the windings are energized by stepping into the motor, there are two directions, if the winding and the reverse winding colleague work. Motor cannot rotate
You can. If it is a two-phase step motor with eight lines, it can be applied with single polarity, series connection and parallel connection. Unipolar wiring requires a single polarity drive, which is not very generic. If the user needs to work in low-speed electric motor torque, can be used in series connection mode, the motor current to set a small some, also to drive the output current of requirement lower; If the user needs to motor working in high speed, can be used in a parallel connection mode, the motor current to set a few bigger, drives the output current to a bigger one. For example, the 42HS03 motor in innast, which is rated at 2.3 A, will be able to work with an electric current of 1.6 A, and will be able to use the EZM322 drive. If parallel wiring is used, the electric current of the motor is about 3.2 A, and the drive of the EZM442 is required. In conclusion, the user needs to select the most appropriate step forward driver for the need to get a greater economic performance.
Can't. Because the step motor involves parallel and only two phase stepping motors, eight lines. Our clients often encounter the wrong wiring error in line 8, some think,
