Carlos warm water separator, ball valve or angle valve is not clear. How are the horizontal and vertical sections of the floor heating separator separated and closed?
Angle valve to cut off media, to facilitate the maintenance of terminal equipment, generally used for washbasin, kitchen sink, toilet water tank, water heater, cold and hot water inlet pipe. When an accident occurs in the water pipe or breaks and leaks after many years, then the angle valve is closed, which does not affect the normal water consumption at home and avoids economic losses.
To put it plainly, you take it half open and half closed, and its flow is not about 50%, and fluctuates greatly. In addition, if the ball valve will be half closed, it will damage the ball valve, greatly shorten its life. Ball valve is mainly used for heating hot and cold water inlet pipe.Angle valve is called "angle valve", because its inlet and outlet are 90 degrees angle perpendicular to each other, rather than straight into the ball valve straight out.
Yours is a ball valve!! The general handle is opened along the direction of the water pipe.. As your current state is to open.Ball valve, as its name suggests, is the shape of a ball valve, water from the hole in the middle of the ball out, usually the handle to control the opening and closing. But the ball valve can only be switched on and off, and can not adjust the flow.
