Characteristics of high frequency vibrating screen of high frequency vibrating screen
The screen of the high frequency vibrating screen has three layers, and the flexibility of each layer is different. The bottom layer that we call it the support network, are always made of steel wire rope core polyurethane paving composite support; online network, composed of stainless steel wire woven; finally this layer is in direct contact with the material needs to work, is called work network. The left and right sides of the screen of the high frequency vibrating screen can be easily loaded and unloaded, and the tension degree is not difficult to adjust. Buffer plate design is also a major bright spot, into the material in the buffer action, the pulp will be distributed evenly, will not directly impact the screen, extending the screen life.
1. The vibration frequency of the high frequency vibrating screen is 50Hz, the amplitude is not more than 2 millimeters, the vibration intensity is at least 2 times of other vibrating screen. High frequency and high intensity effect is the result of high screening efficiency, large processing capacity, the sieve surface is not blocked, sieving fine powder material easy. 2. The installation angle of the high frequency vibrating screen machine can be adjusted at will according to the user's requirements. 3, high frequency vibration screen vibration exciter power is only 0.15kw each, the power consumption of each unit is below 1.2kW, the energy-saving effect is remarkable.
1, no rotating parts, no need to add lubricating oil;2 、 simple structure, convenient maintenance, durable, low failure rate;3, the vibrator uses the resonance principle, dual body critical resonant state work, the required drive power is small, there is no large start-up current at startup, low noise;4, after the vibrator starts, the amplitude instantaneous can achieve the work stability value. When stopping, the amplitude of the vehicle can be instantaneously removed and allowed to start and stop directly at the rated voltage, current and amplitude.5. The vibration or amplitude of the sieve body can be adjusted, and the granularity of the product under the sieve can be controlled by changing the exciting force of the sieve body (adjusting the vibration) so as to guarantee the taste of the concentrate with different crystal granularity;6, in the sieve body vibration at the same time, the screen plate of the screen between the relative vibration, the screen chip gap is not easy to block.
