Back anchor system: to master the direction of rock steering wheel to ensure the direction of the double guide beam. The system is made up of 1 tie rods of rock and roll, and the 1 anchors are used to guide the o3.4. beam system: to master the integrity of the upper and lower beams. The system is composed of four beams, and the upper and the lower parts are correspondingly connected with the upper and the lower parts of the bottom plate of the 1 bottom box of the bottom plate of the bottom plate of the box girder of the 1 box beam, and the weight of the concrete bearing and the bearing of the concrete of the bottom plate and the side mould core of the bottom plate of the box beam of the bottom plate of the two box girders are respectively connected with the upper end and the lower end. Under the pull rod to complete the vertical mold 1 release work o
Compression system: to master the balance of the protection of double guide beam. The system is composed of a pre embedded steel bar and a compression beam, and the force is applied to the box girder section through the double pull rod, and the anti overturning moment is generated to protect the balance of the double guide beam.
Double guide beam system: to grasp the overall stability. The system uses four rows of reinforcing Bailey structure, each single guide beam through the self-made connector integrally formed, two guide beams connected by horizontal system. Operation management, pay close attention to the root and the overall stability, to ensure that the beam after the force does not distort. It has two functions: one is to move forward as a whole, and the other is to bear the weight of the reinforced concrete and the weight of the hanging basket template.
Bottom platform system: to master the width of the adjustment of the force uniformity. The system is composed of a longitudinal beam bottom die and is connected by a hinge support, which is used to maintain the inclination of the bottom die. On both sides of the bottom platform for the working platform, the middle of the bottom mold platform, the use of the side of the mold bottom mold, the bottom mold platform in the process of pouring different beam width can be adjusted o
