Consult an expert, power plant turbine oil vacuum filter oil machine, why use ah, seems to be useful, poly junction separation, what are the advantages and disadvantages, thank you, urgent,
Coalescence type oil filter function to small droplets into large drops of water, only to remove non dissolved water, so only the oil in the water treatment by 180mg/L, cannot meet the requirements of national standard, but if the oil moisture content is very high, the dehydration rate of coalescence separation is faster.In short, if Water Leakage oil measuring system is relatively small, should be a vacuum oil filter, can make the turbine oil quality to meet national standards. If the water leakage is large, optional poly separation type, but can not make the oil to meet the requirements of gb.
Turbine oil vacuum oil filter can remove the dissolved water in oil (about 150mg/L) and non dissolved water (more than 150mg/L will have, that is, the tiny drops of water) in oil water content reduced to below 50mg/L, but if the oil with high water content, the dehydration rate is relatively slow. Beijing instant Technology Co., Ltd. turbine oil vacuum oil filter is a new technology, new products, it is recommended concern
The vacuum oil filter has more water - retaining functions than the ordinary oil filter, because it has the function of water diversion, so as to use it. The role of turbine oil is to lubricate and cool the bearing of the turbine. The oil is easy to enter steam because of its location and the position of the steam seal. Resulting in water, water, resulting in deterioration of oil quality. To slow down the oil quality, say to get rid of the water in the oil. The oil filter that you put together has not been used or seen, and I don't know its advantages and disadvantages, but I think it is a water filter that can remove water. Hope to be of help to you