Crusher construction scheme
1., there should be iron removal device, to prevent the broken cavity iron, and if frequent iron, it may cause shaft fracture accident. 2., to full load production, otherwise the product will appear rough. 3., the crushing ratio distribution in the production line should be reasonable, so as to maximize the efficiency of the crusher. 4. spring pressure can not be too tight, too much pressure will occur shaft breaking accident, the pressure is too small, the spring will frequent beating, affecting the normal work of the crusher, and the product size coarse. 5., the temperature of the lubricant can not be too high or too low, otherwise it will affect the operation of the machine. 6. oil often needs to change, not too dirty, too dirty bowl, and will accelerate the gear sleeve wear, even die sleeve research. 7. transmission belt installation not too tight, otherwise it will cause the drive shaft rotation is not flexible or fracture; not too loose, otherwise it will cause the broken machine boring car. 8., feeding can not be too wet, too sticky, fine particles can not be too much, and can not be too large, otherwise it will cause stuffy car. 9. crushing and discharging of the crusher will cause boring cars. Cone crusher (cone crusher) in the actual operation process will have such problems, depending on the specific situation is not the same to adopt a different solution, this is often seen in the actual operation situation.
Maintenance: cone crusher because of its bad environment, dust, and some use of unit maintenance is not in place, often appear all sorts of problems in the operation of general cone crusher in operation should pay attention to the following problems, in order to ensure the normal operation of the machine. When the cone is broken, the material should be uniform and not segregated. If the feeding inequality appears the decline of production capacity, product size is too large, the spring moves frequently, bowl bearing pressure, rising power consumption.
1. the crushing machine is installed on a strong reinforced concrete foundation. It can also be installed on the steel structure frame. The depth of the foundation is also determined by local soil conditions and site conditions. 2, in order to avoid crushing the cavity of the material accumulation, crushing machine should have enough space to install transportation equipment. The size of the structure can be determined by the matching transportation equipment. 3, provide the basic graph is not a civil construction, according to the user base size map construction design five, selection of crushing cavity type of crushing chamber four, A cavity is broken, B cavity in C cavity for crushing, crushing, D cavity for extra fine. Users can choose as needed.
