Crusher equipment installation skills
The specific installation steps of the crusher can be divided into the following steps: firstly before installing the crusher, should first be machine pit from the crusher discharge port to pit equipment installed. Then install the discharge chute under the crusher base. If it is required to check the foundation concrete foundation, the depth of the hole clearance hole of debris, placed according to the position of anchor bolts, and placed two on the basis of wedge in each hole. If the height of the wedge iron is not enough, the flat iron can be added under the wedge pad iron. The installation should pay attention to sign assembly factory. The installation should be clean all the parts with the combination or dust on the surface of the coating and protection, and eliminate the defects in the process of transportation. The installation of all parts of the surface must be coated with lubricating oil, the fixed surface with dry oil, coated with thin oil activities. Such as machine to clean oil bearing net applications place long time after clean, and according to the specification requirements to fill grease. At the time of installation, should pay attention to the protection of the friction surface, use clean oil and cotton swab surface do not, in easily dirty and scratch with protective plate or clean canvas cover. Therefore the installation should be strictly according to the assembly technical requirements for assembly. Each axis on both sides of the bearing, the level deviation shall not exceed 0.1mm/m. At the time of installation, you can install in accordance with the above steps, even if no previous contact with the crusher installation work, there are tips from the above, the installation of the crusher is no longer a problem.
Before installing generally must first check the power switch is not normal, this is to start the crusher equipment, we in the installation process to the verification center line crusher equipment is not accurate, the second to the axial line of the center line wrapped around the mark on the basis of journal bearing, and then began to check the bolt hole position check later, you can correct the installation of gear reducer and motor. Crusher equipment installation is not complicated, but requires a certain degree of technology, we can not free to install, you may think is right, but there are small when the incorrect installation will have a large deviation, bring great inconvenience
One of the broken machine equipment indispensable in mining, infrastructure and railway construction industry, buy crusher has a lot of related skills, after the crusher equipment purchase, the first step is to install it, when installing the crusher, the middle also has a lot of skills.
