which paint is better latex or enamel
With respect to paints enamel is a fanciful term, implying that an ordinary latex or oil-based paint has the same properties as true, fired vitreous enamel. Some enamel paints have been made by adding varnish to oil-based paint. The term sometimes refers to oil-modified polyesters that were introduced in the early 1930s. The oil is required to stop or enhance the crosslinking of the paint in order to achieve sufficient flexibility of the paint film. Typically the term enamel paint is used to describe oil-based covering products, usually with a significant amount of gloss in them, however recently many latex or water-based paints have adopted the term as well. The term today means hard surfaced paint and usually is in reference to paint brands of higher quality, floor coatings of a high gloss finish, or spray paints. Most all interior paints are acrylic latex and are water based. An Oil-Base High-Gloss Enamel has Exceptional adhesion on previously painted or properly prepared and primed surfaces such as interior and exterior wood, drywall, plaster, masonry, metal, well-bonded wallpaper, brick, stucco, aluminum and cinder block. Not recommended for floors. NOTE: All oil-based paint yellows over time. This natural effect is most noticeable with light colors applied in areas with limited exposure to sunlight. It also has to be cleaned up with mineral spirits. Best for outside use. You should use a resperator if you use inside. Hope this helps
I know the answer too, but looks like you've got enough info to compile a book already so I won't bore ya with a chapter on polymer science. Have a great weekend...
This Site Might Help You. RE: difference between latex and enamel paint? which paint is better latex or enamel
