Can the digital set-top box remote control not turn off the TV? How to operate?The instructions did not specify
You first find the remote control button for the set-top box (there are two power off buttons on the remote control, one for TV, and one for set-top boxes)When you find it, press it and see if it is bright or not. See if the remote controller is out of power, or this function is not open (the second case is almost nonexistent)If it is bright, click on the flash point of the set-top box (not the TV set)
There is no explanation on the back of the remote control. If you do not read here: hold down the learning settings button (about 3-5 seconds), the red indicator light is long2., then press the remote control "TV button" area to learn the key (such as: volume, power switch, etc.), red indicator flashing.3 then will launch tube TV remote control, the corresponding button on your set-top box remote control (white tube in the middle of the remote end) press the button, when the red indicator light of the set-top box remote flash three times, said it had received signal, the key function has been learning.4. continue to press the second steps to start the operation, after learning the rest of the button, and then press the settings button, red instructions, lights can work properly.
Digital set-top box remote controller itself is unable to turn off the TV, even if the use of learning function, remote control shutdown is not completely shut down the power supply, including set-top box shutdown. I suggest that when the power off, or set-top boxes and TV power button closed as well, first, energy saving, and two is safe. One of my colleagues neighbor, because set-top boxes just use remote control shutdown, causing set-top boxes burned, but fortunately, did not cause fire, very dangerous. Hope to help you.
If there is a TV button area on the remote controller of the digital machine, you can learn by the following means":Digital TV set top box remote controller and television remote controller function docking step1. press the "TV key area", "set" button, about 2 seconds after the indicator light becomes long (indicating that the remote control has entered the learning state);2 the TV set device on the launch window learning remote control (the distance between 0.5 cm --10 cm), press the power key learning remote control, when the red light is flashing, then press the TV remote power button, when the red light is flashing into long light, that the power button is learning; use the same method to study the volume "+" and "-" the volume and the TV/AV key, until all the learning;3., after all the studies, and then press the "TV button" zone "set" key to get all the learning code, red indicator at this time to go out, indicating that the learning keys have been completed, you can use normally.
