Does the car control the lock do not lock the problem?
The battery cathode is broken, then connected, and then press the key to do the initialization of the key, not to go to 4S shop to deal with it
There are one or more lock car conditions that are not available. Such as: 1. Ignition key did not pull down (if it has been pulled down, there may be a problem with the ignition cylinder); There is a door did not close Yan (if it has been closed, it is possible to switch off the door lights switch). 3. Check the driving resistance of the lock block is moving, or directly through the manual lock the door to see if the rebound, 4 is to see whether the driving is the main lock problem, a rod is too long, the lock is not the end. Problem, the inside or outside the button hand pull too short .3 in the control of the problem or poor line contact. In short, the controller did not receive the relevant signal, follow this idea to check
The general situation I think the owner should know. I have met once, please check the gear lever self-locking pin has not returned. Please check whether the remote control key is normal.
