Does the decorative board need to paint a layer of paint? Decorative board wall construction process is how?
Construction technology measures: 5.1 find and play line: wood wall panels should be installed according to the design Atlas requirements, in advance to find a good elevation, flat position, vertical size of the elastic line. 5.2 Check the embedded parts and holes: After the bumper line to check whether the embedded parts, wood bricks or wooden wedge meet the design requirements, spacing spacing size, position to meet the requirements of the lapel keel; measuring doors and windows and the location of the size of the vertical And design requirements are consistent. 5.3 shop, coated with moisture-proof layer: the design of moisture-proof requirements when the wooden wall, wood keel installation must find a square, looking straight, skeleton and wood between the gap should be pad mats, each brick at least 2 nails nail, And then put the keel should be set aside when the board thickness. Wood keel and wall contact surface to be anti-corrosion treatment, the remaining three sides of not less than three times the treatment of fire paint. 5.4 Lining installation: After the installation of the keel to check the qualified installation of 15mm thick woodworking board to do lining, requiring liner nail firm, nail fixed spacing control in 200mm or so, the back brush fire paint, splicing board should be reserved between the 5mm Around the expansion of the gap, to ensure that the amount of expansion and contraction of temperature.
Can not brush, decorative plate It is a variety of special paper after chemical treatment, with high temperature and high pressure adhesive made of thermosetting laminated plastic, the board with a variety of grain or pattern, bright and smooth, bright and beautiful color, while Has a high wear resistance, heat, cold, fire and other good physical properties. Because of its own characteristics, so no paint is possible;
