Does the five phase stepper motor have 5 wires?
Five phase stepper motor has ten lines and five lines, two outlet way, drive also has two kinds of wiring mode. If the drive on your hand is a terminal, and the motor is 5 lines, you can't connect it. There are two solutions, one, the motor returned to manufacturers, re wiring; two, change the drive.If the motor is ten lines, the driver five terminals, it is better to solve, you can motor 10 lines in accordance with the phase sequence, parallel to 5, access to drive.
It rotates at a fixed angle, step by step. Number of pulses can be controlled by controlling the angular displacement, so as to achieve the purpose of accurate positioning; at the same time by controlling the pulse frequency to control the motor rotation speed and acceleration, so as to achieve the purpose of speed.
In the case of non overloaded, the motor speed and stop position depends only on the pulse frequency and pulse number, regardless of load changes, when the stepper driver receives a pulse signal, it drives stepper motor to set the direction of rotation of a fixed angle, called "step angle
Five phase stepper motor has five lines and ten lines of two, so there is five lines.The stepping motor is an open loop control element which transforms the electric pulse signal into angular displacement or linear displacement.
