Eighty square meters of living room how to decorate?
When the steel doors must be considered steel door protruding wall dimensions, notify the installation personnel, which makes the final frame and end paste porcelain wall is flat, it is beautiful, and good health.6, wood package door and Mason's tiles is to match the time, packet door, to consider the ground below (either side of the ground on both sides of the door) is also ceramic tile or other cement mortar thing, because if the tiles in the door before the nail, have been wrapped into the ground for future use cement, cement and door if touched, will cause the water moldy wood door
It is also important to test the pressure of the water pipe after the line is drawn. When testing, we must be present, and the test time is at least 30 minutes or more, conditional license, preferably one hour. 10 kg compression, and finally there is no reduction to pass the test.
In the final analysis, the method of dealing with the face of the tiles is the level of the workers. If the level of the wet workers is good, and the tools for grinding tiles are better, the method of grinding 45 degrees angle should be chosen without hesitation. From the point of view of the effect, as long as the good grinding, grinding 45 degrees angle Yang Kok approach is the most beautiful! If the level of workers is really not good, then you still choose to use Yang Kok bar, because the poor grinding of 45 degrees angle, it is better to use the effect of Yang kok.
Bathrooms, air conditioning sockets are not designed switches. In particular, the bathroom electric water heater, with a two stage switch with one plug is appropriate. If you want to turn off the electric heating, it is dangerous to pull out the plug
The partition of the shoe cabinet should not be made of head and leave a little space so that the dust of the shoes can be leaked to the bottom, and the tank and the gas cooker are equipped with lights. When deciding the location of the floor drain in the bathroom, you must first think about it and measure the size. The floor drain is best located on the side of the brick. If it is in the middle of the brick, no matter how the brick is tilted, the floor drain will not be the lowest point.
