Electric mower reversal is going on
Adjust the gap between the moving blade and the fixed knife, the gap can be grasped through the two sheets of paper is appropriate, and to ensure that there is no friction between the knife and the phenomenon. After adjustment, tighten the fastening bolts of each moving blade and set the knife (if necessary, use the length of the handle of the wrench to increase the tightening degree). After that, lock the upper case and confirm that it is secure and reliable
Try to use the pulley with the lawn mower. Do not arbitrarily change the pulley size, improve the lawn mower speed
In strict accordance with the instructions specified in the matching power and speed matching motor. The power line should be made with copper conductor of not less than 6 square millimeters. The current value of the electrical switch, socket, plug and other electrical load should not be lower than the rated current of the motor (specified in accordance with the motor manual). The power switch should be installed in the operator's range of activities, the general distance of the operator should not exceed 3 meters, and there should be no other obstacles.
The electric lawn mower reverses the operation because the reverse key is pressed. 1. Mower should be placed or fixed on a solid, flat foundation. The workplace should be spacious and equipped with fire prevention measures
Check the motor (drive wheel) in the same direction as the specified wheel when the motor is installed and the belt is connected for a short period of time (check the running of the lawnmower), and then adjust the belt Make it elastic.
