The electric water heater has been on the market for quite some time,When the maximum amount of water is transferred to the cold water, the water is normal and the water is much smaller when transferred to the hot water side,What is the problem and how to solve it? It's better to do it yourself.To solve the problem of an additional 100 points, ah ~ ~ ~ thank you
Because of the scale, the electric water heater is directly heated by the electric water temperature, and the electric water heater is not cleaned for a long time, and the scale can be generated, and the scale is adhered to the heating rod to influence heating.
The reason why the hot water of electric water heater is very small:1. people feel that the indoor temperature is low, the skin on the environmental temperature requirements higher, cold feeling is obvious, and another reason is that the heat quickly distributed to the air, reducing the heat of water;
Electric water heater gas tank basic structure similar to the horizontal.The tank has a finger thickness, vertical tube slightly shorter than the diameter of the tank, open top, turning the handle to the hot water valve position, a large number of cold water from the bottom into the cold water, hot water due to high density, low density, so the top always gathered in high temperature water. The hot water is forced by cold water, and the top of the hot water pipe is brought in from the front. The other end of the hot water pipe is connected with the shower. Out hot water for you to use.
2., the reasons for the machine, the electric water heater insulation water tank failure, there is no insulation effect, so hot water will be much less.3 water flow problem, resulting in some hot water has not been fully used which drain. For these reasons the loss of hot water and heat results in less hot water.
