Home > categories > Mechanical Parts & Fabrication Services > Shafts > Engraving machine Y axis suddenly does not move, what's the matter?
Question:

Engraving machine Y axis suddenly does not move, what's the matter?

A few days ago, the spindle always stopped, because of the large amount of tasks, but also insisted on using a few days, now replaced with a frequency converter, the problem solved. This afternoon, the Y axis suddenly in the work did not move, but the manual walk a little problem, automatic walking, walk for a while stopped, this is what reason, seek expert answer..

Answer:

What's the unusual sound? No manual walking. No problem. Low speed and high speed, okay? And when the Y axis doesn't move, is it still moving in the other directions?
3, there may be Y axis controller or control card problems, check the engraving machine and computer cableRecommendation: pump must open, do not work too long, will allow the line aging too fastWhat are the specific causes? What are the symptoms before it appears? Do you have this problem suddenly?
There may be many reasons for the problem, and you don't know what brand engraving machine you are1. Check the path you gave first and see if there is any problem with the path command. Is there a limit?2, check the lead screw or track to see if there is any debris stuck

Share to: