On the European diamond-shaped slit gypsum board ceiling is how to do, the specific process.
Simplify it First in accordance with the general ceiling hanging a flat top, in the flat on the top of a layer of gypsum board, double gypsum board on the seam.
Double gypsum board practice
Ignore the original building floor, with light steel keel or wood keel to make the surrounding and the edge of the ceiling, on the first layer of paper gypsum board, with light steel keel method, pay attention to keel
The density, fasting. After the scraping porcelain white master scraping white porcelain white. Around the edge of the diamond block with gypsum board to do, please measure the size of the enclosure and then to the computer on the layout
Play the drawings, carpentry according to the drawings, cut out the paper gypsum board diamond block, keep the corners intact, not damaged, carpentry use fine lines nail in the edge of the ceiling to spell out the drawings
Of the diamond block and fixed, and then carpentry according to the first layer of smallpox steel keel "tofu block" with ink line pop up the keel of the latitude and longitude center line, in the latitude and longitude line position to the diamond
With a long self-tapping ceiling screws tightening, after the master porcelain white porcelain according to the normal procedure to repair the ceiling until finished.
Two solutions
First, the use of the original building floor to do the end of the method
Carpentry made around the ceiling (how to do this, do not have to say), after finishing in the edge of the wall and the original building between the ceiling of the angle with the level of the way to eject the ink
The original building smallpox to find the level of the corner of the horizon, so scraping porcelain white (South called scraping gum) master know how to find the plains of the building ceiling (floor) thickness, according to the normal
Wipe the porcelain white procedures to scratch the entire ceiling, the amount of the inner wall of the detailed size of the wall, arranged in the computer on the appropriate diamond block, leaving a good seam, generally about 10mm
How to row beautiful, you are doing the design, this do not have to teach it. Drawing, to the construction staff, this method is best called gypsum line manufacturers to do with gypsum board, gypsum line manufacturers
Gypsum-specific glue to the plaster board on the floor, where the premise is the size of each diamond block to control, do not exceed the strength of the glue.
