Fire controller panel fire pump action alarm how to deal with?
The system is prone to problems, causes, and simple handling methods(1) detector malfunction alarm, detector fault alarm. Reasons: too much humidity, too much wind, too much dust, mechanical shock, too long detector use, lower device parameters, etc.. Treatment method: according to the installation environment, choose the appropriate sensitivity of the detector, installation should avoid the wind and wind speed of the larger channel, regular inspection, according to the situation clean and replace the detector.(2) manual button false alarm, manual button fault alarm. Reason: the button used for too long, the parameter drops, or the button artificially damage. Treatment method: regular inspection, timely replacement of damage, so as not to affect the operation of the system.(3) alarm controller failure. Reason: the device itself is damaged, failure or external detector, manual button problem caused alarm controller failure, fire alarm. Treatment method: use table or own diagnosis procedure to judge the machine itself, troubleshooting, or according to (1) (2) processing method, check whether the fault caused by the outside world.(4) line fault. Reasons: insulation damage, loose joints, environmental humidity is too large, resulting in insulation decline. Processing method: check the insulation degree with the meter, check the connection condition, welding process, plastic sealing process and so on.
Fire automatic alarm host, fire pump after the scene starts, the host will show feedback, other linkage or misoperation, this in the host of multi line disk, fire pump button can be canceled, you can turn off.
Fire pump and water pump life and production water pump should be higher than the performance requirements, but the performance and test requirements of our current standard on the fire pump do not make special provisions in detail, resulting in the fire pump in the selection when no data are available, there are a variety of problems.
Fire automatic alarm host, fire pump after the scene starts, the host will show feedback, other linkage or misoperation, this in the host of multi line disk, fire pump button can be canceled, you can turn off.
