Home > categories > Lights & Lighting > LED Tubes > Fluorescent lamp fire line zero connection
Question:

Fluorescent lamp fire line zero connection

Fluorescent lamp fire line zero connection

Answer:

My own LED lights are connected by the zero and the wire, and then the lights will have a very faint afterglow, which will be visible at night. I don't understand. I don't know if I have to reconnect the line.
The inductance problem, produce the magnetic field so the lamp tube will have a faint flash
The fire line is different from the zero line Both the wire and the zero line are charged lines, and if the two phase power is connected to the electrical appliance, the current flows through the wires General feeling of fire electricity, because if people (including some indirect contact with) the contact wire, part of the electric current is passed from the body, like a ShuiGuanZi, originally from the middle points of a faucet. The zero line is not charged because the other side of the power supply (zero) is connected to the ground, and when we reach the zero line on the ground, because there is no difference, there is no current. So there's a zero line of uncharged feeling. The zero line and the fire line are originally generated by the power supply, and the current direction of the current is the one that goes through the external device and comes in from the other end, forming a circuit. The difference between the zero and the wire is one of the two terminals of the power supply So the fluorescent lamp will not be bright!
If you want to break the wire, the short line will flash. Because the wire is stronger than the zero line in a single case

Share to: