Frequency converter, fault, contact action
The frequency converter has 1-2 relay outputs, that is, digital output. By default, most of the output of the fault is the relay. The general definition of the 2 relays is defined as a running output and a fault output.This contact output and inverter circuit inside the electrical isolation, can use 24V, you can use 220V, you can use any lower than the voltage level of 500V to use this contact, according to the actual needs of love then why.
Frequency converter is the application of frequency conversion technology and micro electronics technology, by changing the power supply frequency of the motor to control AC motor power control equipment. The frequency converter is mainly composed of rectifier (AC DC converter), filter, inverter (DC AC converter), brake unit, drive unit, detection unit, micro processing unit and so on. Inverter by internal IGBT drive voltage and frequency off to adjust the output power, the power supply voltage required to provide according to the actual needs of the motor, so as to achieve the purpose of speed, energy saving, in addition, there are a lot of protection drive, such as over-current, over-voltage, overload protection and so on. With the continuous improvement of the degree of industrial automation, inverter has also been widely used.
The frequency converter has 1-2 relay outputs, that is, digital output. By default, most of the output of the fault is the relay. The general definition of the 2 relays is defined as a running output and a fault output.
