Gold tiles and gold medals in Asia which is good
5, the same color to see the surface of the brick surface gloss, the general floor tiles are placed on the ramp on the ramp, there will be above the spotlights or fluorescent lamps, you want to see these bulbs in the brick surface of the shadow (like a mirror The more clear the shadow of the brick to prove the higher the gloss, the greater the hardness of the brick body, the higher the durability, contrary to the more blurred the bubble shadow to prove the lower the hardness of the brick. Note: here I am referring to the polished tiles Oh, and then compare the time must be the same color, you can not use yellow tiles and white brick to compare, that is wrong.
6, if it is to buy antique brick, then the same hand touch brick body positive, hand feel the brick surface of the glaze is delicate, and then close the eyes to watch, glaze granules are rough and so on. Buy antique brick is a special attention to the quality of glaze, you can let the sales staff detailed description of the glaze production process, because the glaze is antique brick life, and the color is the soul of antique brick, so the color must be more Comparison of home, to see whether the color is pure, pick a color from the more pure product on the basic OK.
2, to see the side of the granules of granules are fine and even, the granules are large, rough, then the brick body density crisp, the use of the process will certainly be a problem, give a simple example: you get the house is usually the embryo room, wall The surface is very rough cement surface, when you use the putty powder after the wall is relatively smooth, delicate, and you use such a standard to see just fine.
3, the brick stand up, hand tapping the brick body, the more crisp the sound to prove that the higher the density of brick, the better the quality, the more dull the tones to prove that the worse the density of tiles, tiles, anti-fouling,
4, if it is to buy polished tiles (600 specifications above the tiles), hand touch the brick body surface (hand back touch), start to feel the more smooth proof of the brick surface of the pinhole less, the higher the anti-fouling ability, as long as Do not worry about non-slip problems in the bathroom or in the kitchen.
7, if it is to buy tiles (wall), then look at the brick body side of the body and glaze between the glaze to see the thickness, too thin can not be, because a long time there will be broken or will There is seepage. Look at the surface of the tiles glaze is bright, glaze light good quality.
The above methods 1,2,3 points are common to all bricks, and 4,5,6,7 is a method for different products. The last to add a few pieces of brick weight is a method, the more dense the higher the relative, but this is not useful for all the bricks, for example, now like God God Connaught and several other big brands have a called "light brick "The product, the weight is very light but the quality is also good. So the weight of the contrast can only be used on traditional tile products. If the conditions permit, then the cup of water poured on the back of the brick body to see the water absorption of the brick speed, the faster the harder the brick, the more difficult to prove that the better brick, which is commonly referred to as the ceramic tile water absorption, the general international standards In the following 0.4%, that is, pour 100 grams of water brick will only absorb 0.4 grams, to achieve this standard brick is basically a good brick.
