Home > categories > Electrical Equipment & Supplies > Other Wiring Accessories > Hello to ask a question, high pressure (10KV) bridge and weak bridge can be installed with a horizontal horizontal installation
Question:

Hello to ask a question, high pressure (10KV) bridge and weak bridge can be installed with a horizontal horizontal installation

Computer assembly of these parts together with no problem? There are the price of these parts to understand the next.

Answer:

will not. Choose a good line, 18AWG label better, of course, can buy 16AWG better. The label is on the surface of the wire.
15mm, 20mm the most common, 2.5 square can wear three. Wear 6 square to use 25mm threading tube.
Only to reach a sufficient depth, in order to prevent a variety of external mechanical damage In addition, after a certain depth to a certain degree of stability, reducing the temperature changes on the cable performance and fiber transmission characteristics of the impact of reduced rodent damage, thus ensuring the cable line security and communication transmission quality cable trench depth Should meet the design requirements The former Ministry of Posts and Telecommunications regulations: Under normal circumstances the depth of the cable trench 12m, the width of 60cm, the end of 30cm When the same ditch laying two or more of the cable, each additional fiber, groove width increased by 10cm cable ditch ditch should be smooth, no Hom In the stone, semi-stone ditch at the end should be padded 10cm fine soil or sand, so as not to damage the cable cable trench should be straight, with the center line of the deviation of not more than 10cm, corner of the cable trench, should meet the minimum radius of curvature of the provisions of the cable Fiber optic cable and other related best choice of compliance, and our engineering wiring is generally related to the use of fiber Fiberite, because the standard cost-effective

Share to: