Home lock key card into the keyhole how to do
The fool said, with the tape to seal the hole closed up, even if the eyes are net
The wise man says that I am only admitting my foolishness, or looking for professional personnel
1. Take some oil to see
2. With the paper clip straight and then along the key teeth inserted into the above, slowly out.
3. Unlock the other side of the lock, see the lock heart, and then find a fine wire poke the key.
Oh ~ ~ ~ ~ This is really a problem
No way to change it
If the key is broken in the keyhole, the correct way is: in the keyhole with pencil or oil, and then use the hands of the half of the key inserted into the keyhole repeatedly turn, so that the lubricant into the keyhole deep. And then tweezers sharpened, with tweezers caught inside the half of the key gently shaking, you can remove the.
Locksmith is so get it.
The key to break in the lock of the treatment method one
The following are the same as the "
For such a situation, I understand the feelings of my friends at that time, but do not panic, do not use things to casually dig, the saying goes, the urge is the devil, perhaps because of our anxious to have been able to get out of the key to get deeper So that we have no way, therefore, this time we must first do is calm, then we should do? Continue to look down.
The following are the same as the "
Key in the lock in the treatment of two ways
The following are the same as the "
We need to find a tweezers because this tool is the easiest thing to touch the keys inside the lock, we need to be patient, and hard to hold the keys, and then little by little to the outside, I know that the tweezers drag out the keys A certain degree of difficulty, but we should still have enough patience, the key must be dragged out a little Caixing.
The following are the same as the "
The following are the same as the "
The key in the lock in the treatment of three methods
The following are the same as the "
Wait until the key is a little bit out, we can consider using pliers, because the pliers can make the keys subject to greater external force, so we can fully touch the keys in the pliers after the force to pull out, this method is relatively simple and reliable , Of course, if the two tools are more difficult to find, we can also use fine wire, the specific how to operate it? Then look down.
The following are the same as the "
Key to break in the lock of the treatment method four
The following are the same as the "
We all know that the key above is a certain amount of tooth flower, we can bend the key into a certain angle, and then into the lock, and slowly identify the location of the tooth, in a little bit of patience to drag out , This method is very simple, but this method is only used for some simple structure of the key, the complex key wire may not be able to reach the lock.
