Home old house want to install to warm how to do?
The old house to warm the way of heating must be part of the height of the floor to install the company to lay the ground to reduce the general level of 6-8cm. For many old houses only 2.5m layer height, the impact is still relatively large. Modified to warm is not the best way to heat, and to warm the laying of concrete will be filled with a direct increase in the construction of the ground load. Usually in the area per square meter to increase the weight of about 120kg, so the old room to install the ground to consider the load capacity of the ground. The components of the warm system look very simple, only a simple combination of pipes, sinks / separators, but in fact it contains complex techniques. For the warm design has a very detailed requirements, and in the actual design, a lot of warm installation companies are directly follow the original design. Such a result will be very easy to cause the room temperature uneven situation, laying the program unreasonable easily lead to the use of poor user results. So the old house to install warm, be sure to find the strength of a dedicated designer and their own construction team to install the company to the formal. There is a dry shop to warm, is the direct shop module, and then to warm the tube in the module card slot, the top of the shop directly on the floor, but relatively rare.
To see if you want to install plumbing or warm water warm ye ye can
It is not very good to go to the pipeline. Not how to change
The old house, then the best look at the house into the line can not load the power to ridicule the tank waste Into belly Sang Shakespeare very warm. The domestic market to warm up the country's first electric floor to warm the brand is million warm. Heating cable is copper-nickel alloy, good quality, after-sales have,
