How big screwdriver does the screw for the 1mm use?
1MM screws refer to the diameter of the thread section 1.0MM. The shape of the head of the screw should be flat headed and taper, and the flat head is about 2.0MM in diameter. The diameter of the cross screwdriver used during the production should be 1.0-1.2 in diameter, so it is very suitable to use a screwdriver with a diameter of 1. (there are sold online, hardware stores are basically not sold)You say the screw is very small, ah, than ordinary mobile phones (such as apples, Samsung, millet) screws are smaller, those mobile phones inside the small screws are diameter of 1.5MM.
1mm screws use a screwdriver with a diameter of 1.1MM screws refer to the diameter of the thread section 1.0MM. The shape of the head of the screw should be flat headed and taper, and the flat head is about 2.0MM in diameter. The diameter of the cross screwdriver used during the production should be 1.0-1.2 in diameter, so it is very suitable to use a screwdriver with a diameter of 1.
