How can I connect the signal line, the 24V power line and the fire elevator?
The module bus signal is connected with the bus signal of the system and the power supply end of the 24V access module, and the output signal is connected with the landing signal receiving terminal of the elevator, and the feedback input end of the module is connected with the output signal of the elevator in place;
The connection between fire elevator and module should be determined according to the brand of fire alarm equipment, but most brands have the same method, only a few brands have difference, but the basic principle is the same.
When the connection should cooperate closely with the lift of professional and technical personnel, confirm the need is active or passive signal signal, after the mistake will damage the control board of both sides, the general situation is according to the professional technical personnel requirements of the fire lift out wire, elevator access by professional elevator control box.
