The two bearings are inside a base, about 25 centimeters wide, and want to remove the bearings from the axle, even the base. The length of the wheel pulling machine is not enough. Who knows anything better?.. (bearing behind Kodak 30KG Jieshen washing machine).
Demolition method is unreasonable, should first remove the bearing seat, and then remove the bearings.
Can you put a picture to see, the way is always there.There are only unexpected difficulties in the world, and there is no unexpected way.
Generally, there are three ways to remove bearingsFirst, hit it with a hammer. Be careful, don't break it. To destroy the bearing sleeve, leveraging.First, the lever principle to pry the outside, which requires a support point, usually the bearings in particular in the caseWith Lamar is round Stubbs as you say. There are many models, you can not reach it, for a longer point, and really can not buy their own, three claws longer point is not difficult.You see which method is best for you, too tight down it to spray a little loose liquid, if not then consider heating (it is not only the case)
