How can I use the star 9 set-top box?
Zhongxing 9 set-top boxes are as follows:1, according to the remote control on the "menu" button, enter the main menu interface, select "system settings"; 2, enter the password "9999"; 3, "system settings and select" Install "interface and signal detection" (default has chosen), press "confirm" key two time. Standing in the back of the satellite antenna, satellite antenna for the positive from south to slowly turn the direction of the satellite (suggested that the rotational speed is slower than the speed of the second hand watch). In the process of turning to stare at the TV satellite receiver debugging interface signal strength and signal quality change indication signal turns green when stop action, that has been locked and identify the satellite satellite signal;
Connect the wire, according to the key information, appearance of signal strength and signal quality (signal intensity, line up after the first elevation is about 50~~70), the signal strength to the highest, then adjust the azimuth angle, nine in our country are generally about thirty degrees from the South West, South West slowly turn pot. The signal quality and to the highest, finally can turn a little tuner, the signal to the highest, see all are closed down, fixed on it
4, network connection settings. IP settings: 114.251.156.067, port settings: 4567 or 04567;?????5, the regional encoding set to local ID number before six; 6, close the set-top box power supply, insert mobile phone cards and smart cards, and then boot; 7, select system settings "base station information", according to the confirmation; 8, wait for a satellite automatic search mobile base station information, base station according to the signal strength, automatically a list of base station information;????9, wait for the base station information popup, appeared on television to the base station information scanning, orange button "confirmation"; 10, stored in the channel screen pop-up "smart card is not card, whether to install, choose to confirm the installation, choose to return to play free program dialog box, press OK to open and install later, 11; the automatic pop-up message box prompts sent successfully, exit the menu, the upper right corner of the screen prompts" in the installation process, please wait..." After 2-3 minutes, the screen will automatically pop up "installation success", such as pop up this information, please wait 10 minutes later; 12, automatic broadcast programs, delegated, can normally watch TV.
