Home > categories > Tools & Accessories > Electric Drill > How can the electric drill chuck be removed
Question:

How can the electric drill chuck be removed

How can the electric drill chuck be removed?

Answer:

With a suitable size of the pipe, just hold the drill clamp coat, the middle part of the hammer and the shell separation, inside of the thread is two disc, three catch rearranged into thread, plus fixed coat.
There are several, one is directly knocked into the taper shank chuck, there is an inverse tooth screw fixed, you should be the taper shank chuck, chuck you open to the maximum, knocking in the middle of a vise clamp can be removed
If chuck is tight, you can drill clamp plus six angle wrench a big one, with a mallet percussion, or put the machine in reverse gear, holding chuck, gently squeeze, slightly rotated, but to protect Caution!
Place the collet key on the chuck, and the counter clockwise rotating chuck will do. (Note: not the rotary key, but the key, the rotating chuck)

Share to: