Two days to use, so every time you use up, always turn off the switch, every two days to use, and then open, is this the correct use of it, you can play a savings effect?
The electric water heater heats the water in the tank through the heating rod, and the water is heated and the temperature rises to the temperature we set, and the heater stops heating. When heating, the power of the water heater is the actual power of the water heater. When the heater is stopped, the heater is closed and does not consume electricity. The method of saving energy and electricity is to shorten the heating time as much as possible, increase the effect of heat preservation, and reduce unnecessary hot water loss.
(2) for families that use water heaters every day, just for bathing and hot water is not used, we recommend heating the water heater about an hour before the bath. If you take a shower every day at a fixed time, you can buy a computer controlled water heater and use its timing heating function to complete it. Turn off the water heater after taking a bath.(3) for the frequent use of the (usually at the same time using a water heater, kitchen and bathroom, cooking and washing dishes, bath with hot water) we suggest keeping the water heater has been in the open state, can be used according to the frequency and amount of water used to adjust the water temperature, the use of small, can take the temperature down, using a large amount of cases can be a bit higher.
Here on the basis of the use of different circumstances, respectively, introduced energy-saving methods:(1) do not use hot water often family, here refers to at least two days using a hot water bath, the use frequency is not high, so we suggest that the family began heating an hour before the bath, after the bath is closed, usually when the water heater is in the closed state. This saves power consumption in the least state and saves electricity to the greatest extent.
