To re-do the kitchen so to change the previous, but the tiles left on the traces of viscose, how to remove it? Is there any good way? First, thank you
You can wipe with steel sand. Steel sand is very delicate, knocked out the tiles, marble surface all stains are very effective in the sale of stainless steel products store for sale.
With the cleansing oil ah, the kind of good quality, glass cups on the stainless steel cup mark a few seconds to get, hand rub on the line, and even wipes are not, the most critical is the slightest trace, more Not in the precious shiny items left ugly scratches, rub your things still bright like a mirror. This is my exclusive recipe Oh, most people I do not tell him! Hey hey!
Depends on what is the glue on the wall. Water glue with a towel dipped in warm water can paint clean; silicone with a blade scraping; universal glue (strong glue) with organic solvents (thinner, banana water, alcohol, gasoline, etc.) can be washed clean.
Such as the skin has been torn off, leaving the stickers, then use the oil rub, you can remove stickers can also be used dry flour and rags Sassafras, can remove stickers.
Such as the skin has not torn, with a hair dryer blowing hot air for 15 seconds, and then easily torn off.
The above method is absolutely good, I was on the TV show to see the points must give me !!!!
If it is glass glue
1 with alcohol bubbles
2 glass glue is silicone rubber, with acetone bar
3 with xylene to remove the glass gel effect is good
If it has been dry hard, and can only use a knife scraping, and finally with a fine sandpaper gently worn away, if not too dry, available industrial thinner, can also be wiped with gasoline wiping
Depending on the degree of adhesion on the tile, you can try to get rid of the following methods:
1. We usually use the wiping oil painted to evenly, slightly with nails to pull out the part of the first pull out, the rest of the wet towel to wipe off.
2. With a hair dryer blowing with plastic parts, the glue can be very easy to get off the bar.
3. Spray the oil spirits in the location of rubber marks, after a while a plastic mark that is out, may wish to try.
4. With alcohol + eraser can also be, although this method is more tired, but the effect is good.
5. You can take a piece of vinegar covered with a rag to cover the whole place of plastic marks, until the plastic sticky stains completely wet, you can use the ruler easily removed.
6. If you can, first with blisters, and then coated with a little detergent, and then look at the effect of old toothbrush brush.
7. with a cloth dip tip or Erguotou wipe will have a good effect.
8. With soap plus a little nitrogen and turpentine mixture, you can also remove the glue marks.
9. with a good sticky transparent glue repeatedly tear sticky sticky place, you can also remove some, so that glue marks no longer obvious. Coated with a little bit of sodium water and then rub, a wipe off, or paint thinner can also be used.
10. With a cotton swab dipped in nail polish or sesame oil wipe, glue marks can be removed.
11. Use a special cleaning agent or sports shoes to remove the ointment.
12. If it is left for a long time and has hardened traces, you can use a hot towel to cover it soft, and then try the above methods.
