How can the path of woodworking engraving machine be changed step by step?
Proportional transformation is to enlarge or reduce the path that has been completed. Select the processing path / path transformation command in the menu bar, and pop up the dialog box shown in the diagram. You can change the path of X, Y, Z three direction ratio, the default parameter is based on the center point of the path as the starting point of scaling; point selected, the proportion of X, Y, is set to change the size of the Z, click "OK" button to complete the operation.
Path translation is to change the location of the path in the page, select the processing path in the menu bar [path transformation] command, pop up the path change dialog box, and select the path translation function as shown.You can set the offset for X, Y, and Z, and click OK to complete the operation. Path rotation means that the path is rotated at an angle from an axis, and the 3D transformation of the path effect is realized. Select the processing path / path transformation command, the pop-up path change dialog box, and select the path rotation function as shown. Pick up a line, change the rotation angle, click the OK button to complete the operation.
When we have a relatively complex pattern or document to do a good tool path, but found that the size of the graphics and the actual proportion of the material has a certain gap. In this case, we can modify the path through the path change function of the woodworking engraving machine, thus saving the time for redesigning the graphics and re doing the path. The path transformation function can be used not only to change the path size, change the location of the path, but also to rotate the path in space.
