How can the water heater be used for electricity saving?
(3) the best use of shower bath, shower to save water and electricity for more than a bath, can reduce the cost of 2/3. (4) the water heater temperature setting should be reasonable, open and stop time is determined according to the actual need, if your home every day need to use hot water, water heater and heat preservation effect is good, then you should let the water heater always energized, and arranged in the insulating state, so that not only with the hot water to very convenient, but also to achieve the purpose of saving. (5) for families that do not use hot water frequently, it is recommended that they be heated by electric heating 1 hours before the bath, and then closed after the bath. This saves power consumption in the least, and thus saves power on the electric water heater, saving electricity to the greatest extent.
(1) the thermostat is adjusted to about 65 degrees Celsius, when the electric water heater is the best effect. (2) the electric water heater should be avoided as far as possible, and the thermostat can be lowered in summer to achieve the purpose of saving electricity.
(6) for the daily use of water heaters, just used to take a bath, hot water is not used a small family, it is also recommended in the bath before 1 hours or so open the water heater heating. (7) for the frequent use of the (usually at the same time using a water heater, kitchen and bathroom, cooking and washing dishes, bath with hot water) is recommended to maintain water heater has been in the open state, can adjust the water temperature according to the usage frequency and hot water use, usage is not the case, the lower the temperature a little a bit higher, can use a large amount of cases, so that the energy saving electric water heater
