How can you not damage the filter bag when the filter bag is installed?
The bag cage should be inspected before the bag cage is installed. No burrs, soldering, welding and deformation are not allowed. After the bag is inserted into the filter bag, the bag should be slowly devolution, the speed of devolution will be cut and the filter bag will not be free fall.
The filter bag should be firmly fixed in the orifice, not too tight or too loose. When the installation is too tight, apply the rubber pile to the pocket of the filter bag and gently tap into the bag. When installation is complete, do not trample the bag. It is better to install a filter bag to install the corresponding bag.
The dust filter bag has a great effect on the dust removal effect, and the filter bag must not be damaged by the installation. 1 should pack the filter bags to the installation location and install one of them. The filter bag cannot be dragged carelessly on the board, to prevent the metal burrs from the surface of the filter bag, and damage the filter bag. Remove from the packing box until it is installed to the orifice of the flower plate, not touching any metal or surface roughness. Use the protective cover provided by the supplier when using the orifice, in case the filter is touching the plate hole.
