Home > categories > Sports & Entertainment > Sleds & Snow Tubes > How do I choose the pneumatic pump?
Question:

How do I choose the pneumatic pump?

I want to start one recently, but I don't know how to choose it. Is there a recommendation?

Answer:

Inflation pump is usually not how to use, but is used to play the first aid role, do not see how often used, but if in case of circumstances, the inflatable pump is equivalent to life-saving straw. Therefore, the purchase of inflatable pumps must not covet cheap.
The main function is to pump tire car tyres, so the pump speed is the biggest determinant, suggestions don't hold it a good idea, we must first consider the purchase before the first element is: the complete elimination of flat tire (0 pounds), the tire pressure can be quickly played up to the normal value (flow at least above 30L/Min); correct concept should be based on the number of liters per minute output for the optional conditions, rather than point number; only a few pounds value as the interpretation, can not buy as a pump power base), another point is to fast heat dissipation, good safety performance, which can be a reference. Rimula pump, fast air cooling performance, or.
General inflator pump is divided into metal movement, air pump and plastic movement pump. Comparing the two, of course, the metal movement, pump life longer, durability stronger.The air pump is also divided into a single cylinder air pump and a double cylinder air pump, and the single cylinder air pump is used for inflating ordinary cars, and the double cylinder air pump is used for inflating large tires, such as off-road vehicles and minibus. Notice, whether it's a sedan or an SUV, a minibus, etc. before you pump up. Make sure the car's engine is switched on, or it will burn out the car fuse. The correct operation is to turn on the power before the air pump starts working properly and then the tire is inflated. If you need to restart the power after operation, you should also unscrew the gas nozzle and turn on the engine. Otherwise, it may burn the fuse of the car. For larger power products, it is recommended to use the battery conversion line directly from the battery to power, not hurt the circuit more secure.Note: some pump pressure gauge nominal 300PSI, just to get attention, in fact it is impossible to get such a high pressure (20 ATM.) in 2.5, general tire pressure pressure, general pump can achieve maximum pressure in 7-10.

Share to:

Hot Tag