The water from the heater has a bad smell,Do I need professional cleaning or will I be able to clean it myself?
The last part of the water heater can be opened, apart from the edge (if you don't ask the staff to get out on the inside), heating rods, and observe under the heating rod and the inner wall of the water storage; if it is not clean for a long time, you will be surprised to find that the heating rod and the wall your water heater is on the scale.So how do you clean up the dirt? To buy a pack of cleaning powder supermarket, according to the proportion of descaling powder with water, with a good solution to soak the heating rod, soaking will produce a chemical reaction, producing gas with pungent taste, should wear masks or outdoors.With good descaling powder into the storage tank, soak for twenty minutes or so, the water will be released, and finally rinse with plenty of water.
Turn on the air pressure valve (on the top of the inlet pipe), and the water will be set aside automatically, leaving a basin below and putting all the water in it.When the water is exhausted, open the drain (next to the hot water pipe) and take out the magnesium bar inside. You can see that the magnesium bar has changed beyond recognition. It is full of scale. If necessary, replace the magnesium bar as soon as possible. The more furring the magnesium bar is attached to, the more likely the leakage and explosion of your water heater will be
Water heater cleaning time is generally 2 to 3 years, often not cleaning, easily lead to heating pipes attached to scale, leakage, or even the possibility of explosion, cleaning the water heater when we use it can not be ignored.Before cleaning the water heater, power should be cut off and water out. Then the hot and cold water pipe of the water heater will be opened with a wrench. When the water is removed, the water of the heater will not come out.
