Bathroom aluminum plate hanging ceiling above, there are several wires, for the use of Yuba, Yuba has not yet installed. Occasionally found that these wires did not wear a tube, one of which even has a connector, wrapped with insulating vinyl. This is in the bathroom, ah, more humid, feel a little hanging. Would you like this? Conform to the specification? How should the correct cable? More
You also know that is not in line with the norms, but the problem is not so serious, if you want to change, plus a line tube, the best joints with waterproof tape wrapped around, do not want to change, the waterproof tape wrapped around will not have any problems of
Line is not long enough to be extended, mainly to take into account the shock, you suffer, let the outside no problem.
First, follow the following principles: According to the working current selector switch, according to the switch to select the cable. Because it can not switch did not trip the cable burned, that is not too large switch. Then, for the three-phase input three-phase output of the UPS, the capacity of * 1.5 is the working current size, 100A current current current density .100A ~ 400A election .400A more than . with the current divided by the current is the current The For example, 100KVA UPS, the output current is 150A, 150/3 = . that is, with 50 square millimeters of cable can be. Current such calculation: /220/3=151.5A, so the coefficient of 1.5 is right. The input and output switches can be used with 160A.
The chassis can not put the built-in burner, you can put it inside the chassis can, burn the time to pay attention to the drive to be stable, do not shake because the Lenovo machine in front of only the drive, there are not many of the rectangular space to burn the drive and burner appearance Is the same as the built-in burner SATA data cable enough long, if the power line is not long enough how to buy a long SATA line also a few dollars only, the power cord is also available to extend the line can choose, There are also 220V socket can be inserted into the transformer
