Is it possible to remove just the top row of the ceramic tile on my bathroom walls without damaging the remaining tile? I‘d like to replace the top row with glass tiles for a more updated look.
Really don t know why every ones is trying to answer w/o out knowing what the tile is over as a substrate.. I ll give to 2 types of possible substrates and you determine what you need to do.. If your atop a dry wall and its your trim pc I wouldn t try to do it.. You ll rip up and tear out dry wall hunks.. If your on a cement board or a cement base ( mud walls) this can be done but done carefully..You can chip other tiles when doing this. The grout joint plays a factor in this too. If its a real small joint and using an un sanded joint, the use of a power tool won t get in there to take the grout out. You ll have to dig it out by hand and then try and take tile off.. Any questions you can e mail me through my avatar and check my qualifications there GL
It is possible, but be prepared to replace the entire thing. Hammer and chisel is the only way.
Score the grout pretty good with a putty knife or a dull blade, so when you pop the tiles off, they'll break along that line or you can get a multimaster tool >>>as seen on TV :)
they make bits for dremel tools that'll take the grout out from between the tiles however you'll probably have to replace everything so the funnest way to do it is to get yourself a hammer and just start breaking the tiles one at a time since you'll have to replace everything. however don't use a 3lb sledge hammer i wouldn't even recommend using a 16oz ball peen hammer. best to use a carpenter hammer and a chisel.
in case you're only worried approximately eliminating the tiles, and don't care in the event that they are broken in the process the eliminating, then chisel and hammer could artwork. besides the undeniable fact that! in case you're attempting to maintain those previous tiles in tact, that's a plenty tougher technique. Secondly, you stated the partitions have been plaster (and lathe in the back of that?) as quickly as those partitions are compromised, that's a great form of artwork to re-plaster. different concepts: a million. call a enterprise who resurfaces previous tiles with yet another colored ceramic coating, 2) shrink out those sections of partitions and set up different ingredients, like granite, abbatibi (sp?) , fiberglass sections, or 3) pull down the previous partitions, post new greenboard and re-tile with the tiles of your selection. in case you % an spectacular consequence, i could flow with the 0.33 selection, besides the undeniable fact that that's a great form of artwork. some weeks in case you're working area time and definitely know what you're doing. If it is not probably important to have it final for say, better than 7 years, i could merely have a enterprise re-coat the tile. it will take them a million-4 days and could fee equivalent to or under the different concepts. sturdy success! It' an ambitious undertaking.
