Machine or open, that is, the lights do not fall, how to get?
The front panel of the main board is provided with pinsThe power SW (two pin) corresponds to the panel power SW switchThe reset (two pin) corresponds to the reset restart of the panelHD - LED (two pin) corresponding panel HD - LED hard disk indicator lightSPEAKER horn with SPEAKER (four pin) corresponding panelPW-LED (two pin) corresponding PW-LED power indicator for panelJust follow this connection. HDLED, PW-LED have positive and negative points, you can try.
Check carefully. The tag on the main board has a small font.It is on the motherboard socket panel instructions, if you want to let the power light is not bright, is found on the motherboard in the plug, the plug is very small, but is together side by side, usually in the card slot below is the edge of the motherboard.I think the landlord must be on the machine, not to let the parents find, then you should also put the hard disk indicator light is also pulled out, so that the entire chassis in addition to sound, you can not see the boot is on.
Shutdown, power off, the main board connected to the chassis, power light line dial off, pay attention to make no mistake
Turn off the laptop power indicator to meet two conditions:1. Turn off the power supply of the power adapter or pull out the plug of the power adapter.2, turn off the computer.If the above two conditions are met, the power indicator will go out.
