How do satellite TV receivers tune in at star 9?
Now the star 9 satellite TV receiver, the factory has been pre existing aircraft, according to the installation without the need to search taiwan. Connect the line to the TV to AV mode, press the menu button to open the receiver (or directly by adjusting the star key or F3) and then transferred to the system settings and press the confirm button to enter the password again '0000' or '9999' to press the Enter key, see sub menu "installation and signal detection, in the lower right corner of the screen there the two line shows the signal strength and signal quality for two color, and then around the adjustable elevation and side pot placed southwest slowly up and down, the numerical signal quality to maximum fixed pot and see TV tuner, can press the eject button (because the factory orders have existed pre season receiver machine), not by recovery factory settings and automatic search, because the satellite is not aligned in the pot when absolutely not search programs, but the original pre program parameters will also be removed. The answer was taken by the questioner and the net friend
Satellite TV receiver and signal transfer ChinaSat 9 installation method: first, assembly and installation of the antenna tuner: the antenna tuner and in accordance with the instructions to connect. Two. Line: connect the wire on the set-top box with the wire on the tv. Audio and video line line [audio line (red and white), video (yellow line)] the end is connected to the set-top box of the "right" and "left" and "video" (red, white, yellow) port, and the other end use the same method to insert TV audio and video input. | turn left turn right three, adjust the antenna elevation angle and azimuth angle, elevation: such as antenna calibration has been modified by a query to the offset angle angle; azimuth: South west. The north is about 23.5 degrees west south, and the elevation is 54.2 degrees. The south is about 75 degrees west, and the elevation is 54.2 degrees.
