How do u read computer? No response, is driving the problem?
Pre USB, maybe because there is no plug in, after the modified try, and then no, that is, U disk problem.. Motherboard and drive may not be the problem, it is recommended to find reasons for using the exclusion method, the individual thinks U disk problem
Drive problem, that is also possible, of course, there may be data lines, or the interface is not ready, of course, may be the landlord in the BIOS interface to close the data interface.
Because there may be: USB mouth contact is not good,Treatment: Unplug, wait ten seconds, and then plug in the USB port, so that the contact intact;The computer's USB feature is not turned on,Treatment: start the computer, go to the BIOS settings, find the USB function options, select "enable"";The flash disk drive was not installed (under WIN98 system),Approach: click "my computer" and select properties to find "universal serial bus", delete the STORAGE USB MASS, and then click the "Refresh", then follow the prompts to re install a driver.The computer USB interface with other USB devices (such as printers, scanners, digital cameras) can be used normally, USB flash disk when the indicator light does not shine, not to be able to use
1, generally not driving problems, because after XP from the system, have brought U disk driver. But it could be that the system USB controller is out of control. Check and refresh the device manager.2, the biggest problem may be U disk quality problems, may buy black plate, false disk, or has been broken.3, it could be a virus that could not be opened, and could be hit right - my computer - Management - disk management. Open the U disk from it.4, the U disk into the computer behind the USB interface try to solve the problem of insufficient power supply.
