How do wooden doors and windows on the screen window
Invisible Shoe Belt Track Shaping Shield
Use a hard putty knife to pry the edges of the shade around the window, pry up the nails or staples of the fixed gauze, then remove the gauze and pull out all the staples or dowels left on the frame.
The new window on the frame, with chalk outlines the contours of the window frame openings, and then cut the window cut into four weeks larger than the outline of the size of 3.8 cm.
Hold the frame or hang the weight on the frame so that the frame is bent into an arcuate or arched for easy installation. When using the method of lifting the weight, place the long side of the frame on the two saws and suspend the 4.5 kg weight on the rope around the center of the frame. To fit the frame into a bow, place it on a table or on a wide wood plate across two saws. Place the C-clip on the center of each long side, secure the frame on the working plane, and place the long wood between the frame and the work plane at each end. When the C-clamp is tightened, the frame will bow The With a C-shaped clip, a table and two 5X10 cm of wood to make the window frame arch up.
Place the gauze over the frame and align it along the loose end. Sprinkle the gauze on a wooden frame with a stapler with a thick staple so that the staple is perpendicular to the frame and the staples are separated by about 5 to 7.5 cm. If you are using fiberglass gauze, cut the cut by about 2.5 cm and then fix it. After the one end is nailed, let the loose gauze cross the gripping frame, tighten it tightly and neatly around the opposite end. Operation should be firmly grasp the gauze, the second end into the appropriate position, so that the staples from each other 5 to 7.5 cm, and the frame at right angles. And then release the gauze or remove the weight, when the gauze should be pulled tight tight. After the ends are nailed, cut off all the extra gauze.
Replace the strands, covering the fixed edges of the gauze.
