How do you break the pulley of a cygnet machine?
This is a very easy problem to solve, and the main meaning of your talk is to turn the wheel around and hold the pulley, and then remove the screw.
Haha, use the "F" type wrench I invented. Use 8 mm screw and two 6 mm screws. Use it to jam the wheel hole and edge, and the other hand USES a wrench to remove the screw.
When designing the machine, the motor, the pulley, the gears should be designed which? search
Use a screwdriver to insert a 13mm casing counterclockwise.I hope my answer will help you.
The washing machine turns upside down, first the belt is removed and the fixed screw in the middle of the pulley is removed. If you have the best, you can take the pulley down. There is no rama, and you can use a hammer to gently tap the pulley, not just one point, but a symmetrical one. If still not knock down, tied with wire or rope pulley, lift force, reoccupy hammer inner shaft, pay attention to the shaft between the hammer to pad some copper, aluminum or wood, in order to avoid the shaft type coarse. You will not follow the rotation of the pulley, of course, the square hole of the pulley will be set on the shaft, otherwise the pulley will be followed by the pulley.
