How do you clean the antistatic clothes?
Cleaning of clean work clothes is usually carried out according to * cleaning company. The representative cleaning process is shown in Table 1. The matters needing attention in cleaning room are as follows:(1) the newly made clean working clothes can be washed directly, while the clean overalls are recovered. It should be carefully removed and then washed.(2) to check for damage and abrasion, fasteners and other accessories before washing, the defect to be repaired, replaced or scrapped.(3) must be cleaned in the clean room, than the use of overalls of high cleanliness of clean room in drying and packing.(4) the water used for wet and dry cleaning should be filtered, and the solvent should be distilled. After using the filter membrane of less than 0.2 M pore diameter at the point of use, more than one filtration shall be carried out as needed.
In the final rinse, it is possible to use antistatic agents to improve antistatic properties, but the antistatic agents selected should be well combined with fibers without dust.
Usually, clean clothes are washed at least once a week, and some highly demanding ones are washed even once a day.In ordinary rooms, dust and bacteria are attached to the cleaning, as well as contamination by the cleansing agent. In addition, the packing and handling process, there will be dangerous dust and microorganisms.
