How do you clean the regular hydraulic bending machine?
Solvent impregnated cleaning Cleaning will be cleaning the hydraulic press parts impregnated into the cleaning tank with heating equipment (heating temperature is 35-85 degrees c), and during a cleaning fluid into the compressed air or steam, the cleaning fluid under dynamic, dipping time 4 to 8 hours, the oil pollution serious parts, still need to manually when cleaning wipe.
Ultrasonic cleaning Use appropriate power ultrasonic cleaning fluid intake, the trip point small cavity, its degree of cavity of mine to move, a sudden breaking, the formation of partial vacuum, the surrounding fluid at high speed to fill the vacuum, generate powerful booster has thousands of atmospheric pressure magnitude and mechanical impact, to make the parts in the cleaning fluid contaminants on the surface spalling. This method is short in cleaning time, cleaning quality is good, and can clean the parts that are complex and artificial and cannot be washed. It is more than 10 times more efficient than manual work, and the cost is lower. But this porous substance, which absorbs sound waves, may affect the cleaning effect.
The scrubbing can use a soft brush to remove dirt to keep the unit's accuracy and low roughness. Like the mesh filter, always use hard wire brush, sometimes can damage the filter core or change the filter precision. It is also like high precision, low roughness hydraulic body, using nylon with abrasive ball to brush, brush, groove, groove and sink etc. This nylon brush head is made of black nylon wire with a diameter of 0.3 to 0.6 mm and a green silicon carbide abrasive that is m20
The spray washer is used to clean the machine, which is suitable for continuous operation in large and medium-sized factories. Through good corrosion resistant pump, please allocate to heat water solution to 0.3 mpa pressure spray cleaning, generally speaking, be cleaned parts prewash room, clean room and hot water drift chamber three consecutive injection process. In addition, air currents generated by compressed air can be used to blow off pollutants, which are best for pulsating airflow.
How do you clean the regular hydraulic bending machine?
