How do you do routine maintenance of projection bulb?
The light bulb is most afraid of long-term bakingUse, was according to the inquiry found, originally formed mostly due to factors still take the initiative to shut down the projector bulb temperature is too high, the heat can not be dissipated in time when the formation of the projection lamp and the internal temperature of the machine is too highWhen the projector self thermal protection function will take effect, accordingly, the operating status of the projector will automatically switch over to protect the situation -- take the initiative to shut down, now you don't have to do the projector, or worried, first adopted by theMethod is to be active projector shutdown after about half an hour, you in accordance with the general boot order to open the projector, general can let the projector rehabilitation normal operation.Originally, processing initiative off the most radical solution, one is to construct the projector cleaning of dust regularly, to ensure that all the wind road smooth and maximum limit to the bulb cooling; another is not to let the projection lamp is not betweenThe long-term operation - that users don't make continuous projection homework 5 -- 6 hours or more, especially in the high temperature environment, even if there is a cooling fan can play a cooling effect, but the long-term high temperature bakingIs still very simple light bulb life decay.
Avoid pulling out the power directlyThe projector is turned off, the cooling fan will still rely on the power at high speed in operation within a period of time, the main intention to do so, is to make long-term use after the bulb can cool to the lowest temperature, then reduced when the electricThe fan stopped working after natural cooling time of the bulb, so when the user in the use of end projection, advocate to fan stopped completely after the operation, and then unplug the power, so to ensure the projection on each after using, can shorten the naturalThe cooling time, but also directly to extend his lighting effect. Some special needs, that is, the end of the business people, now on the market already has the "on or off" function of the projector, are equipped with a small electrical storage, canCut off the power supply after the fan can be enough to ensure the continued operation until the heat dissipated, it can be cut off the power supply will be the end of the presentation can take the projector.
Prevent repeated movementIn the projection process, we will definitely encounter the condition of adjusting the projection azimuth. At this time, many people will adopt the direct movement method to adjust to the appropriate position. But what we're going to tell us here is that it wasWhen the light bulb is in use, the temperature will be very high. At the moment, the filament inside the bulb is usually operated in semi molten condition. If the projection is moving frequently at this time, it will probably harm the projection bulb. Thus advocated,If it is placed in the projection, when we use the two or three best can be placed in position to determine the projection, such as non special conditions, we must prevent the move, so every time not only easy to use, but also reduce the direct harm to the projection.The projection bulb replacement / installation method is very elegantWhen the projection lamp needs replacement, we should immediately check the projector containing instructions, ensure the protection and replacement steps accurately; at the same time, buy the bulb, we also recognize that what the common type and the projector bulb can compatible, which is not compatible, if the selected fault type and may burn lighting, projection the lamp and projector.All objects on so precious, we usually use the best care treatment, carefully protected, it means only a maximum limit, extending life saving bulbs.
