How do you know the installation plans of furniture and wardrobe?
Fixed before more observation, avoid rework, because the screw hole will be removed more than once, affecting the service life. The last kind is the most difficult part of the wardrobe regulation is not professional. It generally adjustment is not good, generally divided into two to three distinguish joint hinge, a camber is the middle straight is on both sides of the door with the mirror is manufactured by the largest curvature, after fixing screw holes if missing on the first fine gap to turn the cabinet observation are generally the terrain so you can complete the appropriate pad.
The first installation is not so good if that is not clear, the box open all the small group first put aside the cabinet, back against the wall base put with screw gestures, attention and distinction in the side of the baffle, baffle and the side of the nail ding on the fixed side, because the position is dead wrong is not installed, so long as they can with the side of general.
First of all, wardrobe roughly divided into: side, top, bottom, side door, door, backplane, five pieces of goods. Of course, different manufacturers have different packing numbers, mainly depending on the package number. If it's the first installation, I don't think it's very useful because I can't tell the details of the hardware and the screws. The installation sequence is: first base, middle side, back panel, top plate, side plate, and finally door panel. Usually with black plastic screws in the edge of the board position, the middle side is generally only a row of black rod behind the screw, the middle part is usually a short metal color barrier nails.
