How do you make holes in the steel plate with the welding rod?
1, the following general 10MM board directly to the plate electrode for an empty blow through, must further expand air through the air, need more air electrode with air to air around the suitable size, but the steel bottom board should be suspended, is conducive to the burning capacity of molten iron flow, general space only with electrode blowing, too small to empty is not blowing to using electric drill.2, the electrode (coveredelectrode), is the metal coating in the welding core (coating), uniform centripetal pressure applied to core. The core metal cored electrode, in order to ensure the quality and performance of the weld, there are strict rules on the contents of metal elements in the core, especially for harmful impurities (such as sulfur, phosphorus content, etc.) should be strictly restricted, better than the base metal. The electrode consists of two cores and coating composition. The different cores are also different. The core components directly affect the composition and properties of the weld metal, so the harmful elements in the welding core to as little as possible.
Adjust the high current, after the arc, when the steel plate is molten iron, use the welding rod to insert the steel plate.
Want to use the electrode punch on the plate, must be able to understand the welding technology, welding machine to increase the output voltage of the arc in arc enough force, the following general 10MM board directly to the plate electrode for an empty blow through, must further expand air through the air, how much space with the electrode with the air bypass to empty suitable size, but the steel bottom plate should be suspended, is conducive to the burning capacity of molten iron in air outflow, general electrode blowing, space is too small is not blowing to using electric drill.
