How do you print or pattern on wood products?
2, gelatin film on the original version of the paper on the rules line, multi-color version of the rules are used as installed version of the rules. Put the engraved version together with the original, placed in the appropriate position of the screen plate, according to the rules of the original rules of the rules of the binding rules with milky white paste attached to the screen plate, and paste with a paper sheet. There are several sets of color with a few screen plate set a unified rules. The original with the engraved version, placed in the rules of the board, put down the screen box, in the top of the screen with an iron aligned engraved
Gelatin version of the four corners of the edge of the ironing, so that gelatin version of sticky on the screen after the original release. Put some thick paper on the plate, put down the screen frame so that the gelatin carved paper pad flat, and then covered with a polyester film on the film from the role of the interval, with iron back and forth several times, so that gelatin film Hot on the screen. After a good version of the natural dry, and then peel off the liner and the use of ketone to the opposite side of the liner and the interval between the coated PVC overshoot scrub clean. If the version of the place can be used to retreat glacial acetic acid, if the knife edge of the knife marks and small strokes off, you can use the pen dipped in plastic repair.
3, nitro varnish modified film on paper version of nitro-varnish modified film on the version of the same method.
(5) closed network
The screen is about the screen outside the screen with colloidal sticky block up, so that the printing plate in the printing does not leak ink. Wax grams of film version of the network can be used nitro-varnish, gelatin solution can be sealed gelatin film version and nitro-varnish modified film version. The printed plate is printed and dried. Second, the photosensitive screen printing plate
